Medium-consistency pump MC
STANDARD, C-01-000000
Rev. 0, 2010.02.09 OPERATION Kap.6 , Seite 5 of 12
GRZ-2698572-v1-Operation.FM
Defoamer, if necessary, has to be added according to the requirements of
ANDRITZ AG.
(standard air content in filtrate ~ 1%)
Automatic control The entire control of the MC pump has to be carried out via automatic
control. ANDRITZ AG does not issue guarantee, when the operating point
is left without permission of ANDRITZ AG.
Level
measurement
Level measurement in the standpipe has to be carried out by the use of a
pressure cell or in special cases by a rope sensor.
Additionally to the pressure cell radiometric measurement can be used for
maximum level surveillance in the standpipe.
To Next Page
Loading...
