Setting Markers
Step 6.
Press the MARKER key on the keypad.
Step 7. Accept or change the settings. To change, press the
applicable M1, M2, M3, or M4 soft key and either:
q
Enter a numeric value from the keypad and press
the ENTER key.
q
Or press the Up/Down Arrow key and press the
ENTER key.
Setting Scale/Limits
Step 8.
Press the LIMIT key on the keypad or the SCALE
soft key, from the Main Menu.
Step 9. Accept or change the settings. To change, press the
applicable TOP, BOTTOM, or LIMIT soft key and
either:
q Enter a numeric value from the keypad and press
the ENTER key.
q
Or press the Up/Down Arrow key and press the
ENTER key.
2-28
Chapter 2 Operation
To Next Page
Loading...
