Step 5. Follow the database instructions to download the
plot(s) to either a new database or an existing data-
base.
Step 6. Enter the number(s) of the stored-display memory lo-
cation(s) (1 to 70) from which you wish to store to
the database, and click “OK.”
Step 7. Observe that the “Acquiring Control” box appears on
the screen, then disappears as traces are automatically
acquired. The “Database” box appears when the
plot(s) has been completely captured into the data-
base.
Capture multiple traces to PC screen
Step 1. Perform steps 1, 2, and 3 of the capture-multiple-to-
database procedure.
Step 2.
Click on “Capture Multiple Traces” icon or click
on Capture, in the top menu bar, and select Capture
Multiple Traces from the drop-down menu.
Step 3. Enter the number (or numbers) of the stored-display
memory location(s) (1 to 70) from which you wish to
display traces in Site Master Software Tools.
Step 4. Select “OK.”
Step 5. Observe that the “Acquiring Control” box appears on
the screen, then disappears as the traces are automati-
cally acquired.
Single trace capture
Step 1. Perform steps 1, 2, and 3 of the capture-multiple-to-
database procedure.
Step 2.
Click on “Start a Plot Capture” icon or click on
Capture, in the top menu bar, and select Start Cap-
ture from the drop-down menu.
3-8
Chapter 3 Screen Capture Program
To Next Page
Loading...
