Chapter 3
Software Tools
Program
Description
The Site Master Software Tools program provides the means for trans-
ferring the measured trace, along with any applied markers and/or a
limit, to the screen of an MS-DOS based personal computer (PC) run-
ning Windows, Windows for Workgroups 3.xx, Windows NT, or
Windows 95.
Requirements
The Site Master Software Tools program is a standard Windows 3.x
program and will run on any computer that will run Windows, Win-
dows for Workgroups 3.xx, Windows NT, or Windows 95. Typically,
this means having a PC with the following characteristics:
•
386 or better microprocessor running enhanced mode
(386DX, 33 MHz or better, recommended).
•
8 MBytes of memory, minimum.
•
Hard Disk Drive, with approximately 3 MBytes of available
space.
3-1
3
To Next Page
Loading...
