show OFFSET is ON along with the entered value in
dB.
Displaying Power in dBm and Watts
Step 7.
Press the UNITS soft key to display power in Watts.
Displaying Relative Power
Step 8.
With the desired base power level input to the Site
Master, press the REL soft key. The message area
will show REL: ON and the power reading will indi-
cate 100%.
Step 9.
Press the UNITS soft key to display power in dBm.
Since REL is ON, the power reading will be in dBr,
relative to the base power level.
2-49
Chapter 2 Operation
To Next Page
Loading...
