Step 5. When the Setup program prompts, select “OK” or
press the Enter key to restart Windows.
NOTE: The Setup routine will create a new Program
Manager Group named “Site Master Software Tools.”
This group will contain three file icons, “Read Me,”
“Site Master Help,” and “Site Master Software Tools.”
Step 6. Double-click on the “Read Me” icon to read about (1)
recent changes that did not get into this manual
and/or (2) important features or problems that you
should know about.
Step 7. Double-click on the “Site Master Help” icon to ac-
quaint yourself with the comprehensive on-line man-
ual. This manual provides descriptive narrative for
the various program features and controls.
Step 8. Double-click on the “Site Master Software Tools ”
icon to open the Software Tools program.
Step 9. Click on Settings, in the top menu bar, and select
COM Port. Enter the appropriate COM port number
for the serial interface cable (null modem type).
Plot Capture
Plots (traces) can be captured either singly from the Site Master dis-
play or in multiples from one or more stored-display locations. Both
methods are described below.
The recommended method is the Capture Multiple Traces option in
the Capture pull-down menu. Using this method, you can download to
the Software Tools program in one operation all of the data residing in
the up-to-70 Stored Display memory locations. The downloaded traces
will appear in a database or in cascade on the PC screen.
3-6
Chapter 3 Screen Capture Program
To Next Page
Loading...
