Anritsu Site Master - Scaling the Display; Adjusting Markers

Scaling the Display
Step 13. The display can be scaled using either of the follow-
ing methods:
q
Automatically scale the display using the AUTO
SCALE key (Figure 2-1, page 2-0).
q
Manually scale the display using the LIMIT key or
the SCALE soft key—from the Main Menu—and
the TOP and BOTTOM soft keys from the ensu-
ing soft key menu (page 2-12).
Adjusting Markers
Step 14.
Press the MARKER key (Figure 2-1, page 2-0) to
call up the Markers Menu (Maximum of 4 available
markers).
Step 15.
Press the M1 soft key on the Markers Menu to select
Marker 1. This will open the Markers 2nd Level
Menu. Press the ON/OFF soft key to turn M1 on.
Press the EDIT soft key to open the M1 parameter
for data entry. Enter the desired numerical value us-
ing the keypad or the Up/Down Arrow key (Figure
2-1, page 2-0). Press ENTER when the data entry is
complete.
Step 16.
Press the BACK soft key to return to the Markers
Menu.
Step 17.
Press the M2 soft key on the Markers Menu to select
Marker 2. This will open the Markers 2nd Level
Menu. Press the ON/OFF soft key to turn M2 on.
Press the EDIT soft key to open the M2 parameter
for data entry. Enter the desired numerical value us-
ing the keypad or the Up/Down Arrow key (Figure
2-1, page 2-0). Press ENTER when the data entry is
complete.
2-38
Chapter 2 Operation