Anritsu Site Master - Adjusting a Limit

Press the EDIT soft key to open the M1 parameter
for data entry. Enter the desired numerical value us-
ing the keypad or the Up/Down Arrow key (Figure
2-1, page 2-0). Press ENTER when the data entry is
complete.
Step 10.
Press the BACK soft key to return to the Markers
Menu.
Step 11.
Press the M2 soft key on the Markers Menu to select
Marker 2. This will open the Markers 2nd Level
Menu. Press the ON/OFF soft key to turn M2 on.
Press the EDIT soft key to open the M2 parameter
for data entry. Enter the desired numerical value us-
ing the keypad or the Up/Down Arrow key (Figure
2-1, page 2-0). Press ENTER when the data entry is
complete.
Step 12. Press the DELTA soft key to display the difference
between M2 and M1 in SWR (dB) and in distance.
The delta function displays the difference of M2, M3,
or M4 with repect to M1.
Step 13.
Press the BACK and the MAIN soft key to return to
the Main Menu.
Adjusting a Limit
Step 14.
Press the LIMIT key (Figure 2-1, page 2-0) to call up
the Scale Menu.
Step 15.
If the Limit needs to be turned OFF, press the LIMIT
soft key on the Scale Menu. If the Limit needs to be
turned ON, press the LIMIT soft key again. This will
open the Limit parameter for entry. If needed, enter
the desired numerical value using the keypad or the
Up/Down Arrow key (Figure 2-1, page 2-0). Press
ENTER when the data entry is complete.
2-46
Chapter 2 Operation