Anritsu Site Master - Storing a Display; Recalling a Display

Step 27. Enter the desired numerical value (1 to 6) using the
Up/Down Arrow key. Press ENTER when data entry
is complete. To restore the factory defaults, enter 0,
then press ENTER.
Storing a Display
Step 28.
Press the SAVE DISPLAY key. This will display the
next available empty memory location.
Step 29.
Press ENTER to store the display in the current
empty memory location or enter the desired numeri-
cal value using the keypad (1 to 70) or the Up/Down
Arrow key. Press ENTER when entry is complete.
Step 30.
Enter the current time in HHMM format. Press
ENTER when entry is complete.
Step 31.
Enter the current date in DDMMYY format. Press
ENTER when entry is complete.
Step 32.
Enter an 8-digit reference designator. Press ENTER
when entry is complete.
Recalling a Display
Step 33.
Press the RECALL DISPLAY key.
Step 34. Enter the desired numerical value using the keypad (1
to 70) or the Up/Down Arrow key. Press ENTER
when data entry is complete.
2-40
Chapter 2 Operation