Chapter 3 — Options Verification 3-11 TD-LTE Signal Analyzer Option 551 and/or 552 and/or 543
MS272xC MM PN: 10580-00279 Rev. E 3-45
3-11 TD-LTE Signal Analyzer Option 551 and/or 552 and/or 543 Verification
The tests in this section verify the functionality of the TD-LTE Signal Analyzer of the MS272xC Spectrum
Master.Tests are established for TD-LTE Channel Power Accuracy Tests (Option 551 and Option 543) and
TD-LTE Residual EVM and Frequency Error Tests (Option 552 and Option 543)
Equipment Required for MS2722C, MS2723C, and MS2724C
• Anritsu MG3700A Vector Signal Generator
• Frequency Reference Symmetricom Rubisource T&M
• Power Meter, Anritsu Model ML2438A
• Power Sensor, Anritsu Model MA2482D
• Power Splitter, Aeroflex/Weinschel Model 1870A
• Fixed Attenuator, Aeroflex/Weinschel Model 44-6 (2)
• Anritsu 34NN50A 50 ohm Adapter (2)
• Anritsu 15NN50-1.5C RF Coaxial Cable
• BNC male to BNC male Coaxial Cable
Equipment Required for MS2725C and MS2726C
• All of the above, plus
• Anritsu 71693-R Ruggedized K(f) to N(f) Adapter
To Next Page
Loading...
