Patient monitor User’s manual
Chapter 21-6
In the holographic waveform review window, you can:
——Select【Start time】to set the beginning time of review.
——You can select the waveform label needing to review in the parameter
selecting frame.
— — Select or , shift the time cursor left or right to browse
waveform in more time.
— — Select or to shift the trend cursor. Time above the cursor is
the time when the cursor is in the current location.
——
Select
【
ECG Wave Gain
】
to change the amplitude of ECG wave.
The options are【0.25×】,【1×】,【2×】and【4×】.
——Select【Wave Speed】to set the reviewing wave speed. The width of
the waveform will change accordingly at different waveform speed.
To Next Page
Loading...
