Anyview A8 - Equipment Symbols

Patient monitor User’s manual
Chapter 1-17
Note:
 EMS can connect with the host monitor as the multi-function measuring
module of the host monitor. At the time, among the buttons of EMS, the
screen switching button is still enabled, the rest functional buttons are
equal to the corresponding buttons on the host monitor. The host
monitor executes EMS functions of menu display and alarm as well.
 EMS can also be used as a stand-alone monitor for a patient. At the time,
all functions of button operation, menu display and alarm are enabled.
The details refer to Chapter 16 EMS.
1.4 Equipment Symbols
Symbol
Symbol Note
Symbol
Symbol Note
Attention: Consult
accompanying documents
(this manual).
ECG
Short for
“ “Electrocardiogram”
Non-ionizing radiation
SpO
2
Short for “Pulse Oxygen
Saturation”
Dangerous voltage
TEMP
Short for “Temperature”
Equipotential grounding
IBP
Short for “Invasive Blood
Pressure”
Alternating current
NIBP
Short for “Non-invasive
Blood Pressure”
Auxiliary output
connector
CO
2
Short for “Carbon dioxide”
DVI display connector
AG
Short for “Anesthetic gas”
VGA display connector
ICG
Short for “Impedance
cardiography”
USB socket
C.O.
Short for “Cardio Output”
Defibrillator
synchronization output
connector
CSM
Short for “Cerebral State
Monitoring”
