Anyview A8 - Page 255

Patient monitor User’s manual
16
Anti-interference
ability
Anti-interference of movement
Anti-interference of electrocautery unit
Resisting low
perfusion ability
PR amplitude ≥0.1% with value of SpO
2
displaying
PR modulation tone
（Pitch Tone）
with
Auto light adjusting
Multilevel light adjusting, with powerful fit ability
SpO
2
alarm range
0% to 100%, high/low limit can be adjusted
continuously.
Sensor
The LED of the pulse oximeter sensor produces red
light about 660nm in wavelength) and infrared light
(about 905nm).
Emitted light energy is
≤
15 mW.
The above information is particularly useful for
clinical doctors (for instance, in optical dynamic
therapy)
PR
Measurement range
25 bpm to 254 bpm
Resolution
1 bpm
Accuracy
±1% or ±1 bpm, whichever is the greater
Average time
8s
PR alarm range
0 bpm to 300 bpm, high/low limit can be adjusted
continuously.
 Nellcor SpO
2
SpO
2
Measurement range
0% to 100%
Resolution
1%
Accuracy
70% to 100%: ±2%（adult/pediatric）
70% to 100%: ±3%（neonate）
0% to 69%, unspecified
Average time
8s, 16s
PR
Measurement range
20 bpm to 300 bpm