Anyview A8 - Page 268

Patient monitor User’s manual
29
Noise
< 2µV
p-p
, < 0.4µV RMS, 1–250 Hz
CMRR
>100dB
Input impedance
>50Mohm
CSI and update
0-100. Filter 6-42 Hz, 1 sec. update
EMG
0-100 logarithmic. Filter 75-85 Hz, 1 sec. update
BS%
0-100%. Filter 2-42 Hz, 1 sec. update
Wireless range
Up to 10 meters
Display size
32×17 mm
Alarms
High / Low with user selectable limit
Artefact rejection
Automatic
Sensor impedance range
0-10kOhm / measurement current 0,01µA
Battery
9V Alkaline or rechargeable NiMH
(6AM6/IEC:6LR61/ANSI:1604A )
Supply current
30mA (typical)
Max. battery lifetime -
Alkaline
30h (stand alone)
18h (transmitting wireless)
Max. battery lifetime -
Rechargeable
10.5h
Charging time
4 Hours (CSMX04 only)
Weight
130 g with battery
Dimensions
114x60x31 mm
Classification
Internal power supply/ Class II, type BF, continuous
use
Sensors
Danmeter Neuro Sensors
TM
Cable length
195 cm/77” with 35 cm/14” split
Mounting options
Velcro strip (42mm x 25mm)
Memory
Data recording 18 hours
A.6.12 BIS
Measurement Index
Bispectral index (BIS), myoelectric activity (EMG),
signal quality index (SQI), suppression ratio (SR), break
count (BC), total power (TP), and spectral edge frequency