Patient monitor User’s manual
Chapter 2-2
To ensure patient safety, use only parts and accessories specified in
At the end of its service life, the monitor, as well as its accessories,
must be disposed of in compliance with the guidelines regulating the
disposal of such products. If you have any questions concerning
disposal of the monitor, please contact us.
Magnetic and electrical fields are capable of interfering with the
proper performance of the monitor. For this reason make sure that all
external devices operated in the vicinity of the monitor comply with
the relevant EMC requirements. Mobile phone, X-ray equipment or
MRI devices are a possible source of interference as they may emit
higher levels of electromagnetic radiation.
Before connecting the monitor to the power line, check that the
voltage and frequency ratings of the power line are the same as those
indicated on the monitor ’s label or in this manual.
Always install or carry the monitor properly to avoid damage caused
by drop, impact, strong vibration or other mechanical force.
To protect against injury from electric shock, follow the directions
1) Always turn off and disconnect the power cord from the AC power
supply before cleaning the device.
2) Use cleaning solutions sparingly.
To ensure patient electrical isolation, connect only to other equipment
with electrically isolated circuits.
Do not attempt to reprocess, recondition or recycle any Masimo
sensors or patient cables as these processes may damage the electrical
components, potentially leading to harm.
Do not immerse the sensor or patient cable in water or, solvents, or
cleaning solutions (The sensors and connectors are not waterproof).
To Next Page
Loading...
