EasyManua.ls Logo

Anyview A8 - Page 34

Default Icon
305 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Patient monitor User’s manual
Chapter 2-6
Before Use
Before putting the system into operation, please visually inspect all
connecting cables for signs of damage. Damaged cables and connectors must
be replaced immediately.
Before using the system, the operator must verify that it is in correct
working order and operating condition.
Periodically, and whenever the integrity of the product is in doubt, test all
functions.
Cables
Route all cables away from patient’s throat to avoid possible strangulation.
Disposal of package
Dispose of the packaging material, please observe the applicable waste
control regulations and keeping it out of children’s reach.
Explosion hazard
Do not use this equipment in the presence of flammable anesthetics,
vapors or liquids.
Leakage current test
When interfacing with other equipment, a test for leakage current must be
performed by qualified biomedical engineering personnel before using with
patients.
Battery
The device is equipped with a battery. The battery discharges even when
the device is not in use. Store the device with a fully charged battery and take
out the battery, so that the service life of the battery will not be shortened.
Disposal of accessories and device
Disposable accessories are intended for single use only. They should not
be reused as performance could degrade or contamination could occur.
The service life of this monitor is 5 years. At the end of its service life, the
monitor, as well as its accessories, must be disposed of in compliance with the
guidelines regulating the disposal of such products. If you have questions
concerning disposal of products, please contact manufacturer or its
representatives.
EMC
Magnetic and electrical fields are capable of interfering with the proper

Table of Contents

Related product manuals