Arrow CYC5000 - Page 9

CYC5000 User Guide www.arrow.com
Page | 9 March 2023
Configuration and Debug
• On-board Arrow USB Programmer2 (micro-USB type B connector) – JTAG mode
Connectors & Headers
• CRUVI HS Connector
• Arduino MKR compatible Header
Buttons and Indicators
• 2 Side-Buttons
• 8 red user LEDs
• 2 board status LEDs
Power
• Recommended external supply voltage range: +5.0 V (nominal)
• Recommended I/O signal voltage range: 0 to +3.3 V