PRELIMINARY
Calling
USER MANUAL
Ascom i63 VoWiFi Handset
4 Calling
4.1 Open the Call List
1 Press Menu.
2 Select Calls
.
3 Select Call list.
4 Select a number.
5 Press
or the soft key Call to dial. The number can
be edited before the call is dialled. Press More and
select Edit number. The 25 last received, dialled or
missed calls are stored in a call list. See Calls, page 98.
4.2 Incoming Call
A ring signal or vibrating handset, or both, indicates an incoming call. The ring signal and vibrator can be
disabled. The calling party handset number or name is displayed. The name is displayed if the calling party
handset number is stored in the local phonebook.
To answer the call, press
.
When a headset is connected to the handset, the headset button can be used to answer the call. In addition,
the headset button can be configured with a specific function, such as post-dial, dial last called number, or
dial a predefined number.
Other answering methods can also be set in the Settings menu, see Settings, page 105. The answering
methods are Automatically and Loudspeaking. When Automatically is enabled, all incoming calls are
connected automatically.
4.2.1 Answer a Call
When the signal sounds press or the Accept soft key to answer the call. The call can be answered in
loudspeaking mode by pressing the
soft key. The name or number of the calling party is displayed if
calling line information is available.
4.2.2 Decline a Call
When the signal sounds, press or the Decline soft key to answer the call.
If the handset is configured to respond to declined calls with a message template, the Reply with
a message template? prompt is displayed. For additional information, see 5.9 Decline a Call with a
Predefined Message, page 39.
4.2.3 End a Call
Press to end the call. The duration of the call is shown in the display. The total time of the call can also
be retrieved from the Calls menu, Call time.
17
TD 93289EN / / Ver.
To Next Page
Loading...
Need help?
General
