PRELIMINARY
USER MANUAL
Ascom i63 VoWiFi Handset
Messaging
5.12.1 Send Mobile Data
User entered data can be sent from the handset by pressing a pre-programmed Hot key or Soft key, or
selecting a Service. Mobile data can be used for opening a door, starting/stopping a machine etc. The data
can either be predefined, or entered after the Hot key/Soft key is pressed or Service is selected.
The data can be predefined when programming the Soft/Hot key or Service, see 8.2.1 Define Soft Keys,
page 55, 8.2.2 Define Hot Keys, page 55, or 8.3.1 Add Services, page 57.
5.12.2 Send Mobile Data with a Prefix
Mobile data with a prefix is sent from the handset by entering data and then pressing a pre-programmed
Hot key or Soft key or select a Service. Mobile data with prefix can be used to send information to an
application in the system.
The prefix is predefined by the user when programming the Soft/Hot key or Service, see 8.2.1 Define Soft
Keys, page 55, 8.2.2 Define Hot Keys, page 55, or 8.3.1 Add Services, page 57.
5.13 Voicemail
This feature is only available if configured in the system.
5.13.1 Check the Voicemail Inbox
The voicemail is indicated by the Voicemail message icon in the front of the voicemail message, and is
also displayed first in the inbox list.
If the content of the notification is displayed, press Call to dial the voicemail. If Close is selected, the
voicemail can be dialled by a long press on digit key 1 in standby mode, or from the Inbox menu.
1 Enter Messaging menu, see Messaging, page 101.
2 Select Inbox.
3 Select the voicemail message.
4 Press View.
5 Press Call.
Voicemail is displayed with one entry in the message list regardless of the number of voicemail received.
5.13.2 One Key Voicemail Access
A long press on digit key 1 in standby mode calls voicemail. If the extension number is not available a dialog
window Voicemail number not defined is displayed.
Some systems require that the mailbox extension number is downloaded to the handset, refer to
the Configuration Manual, Ascom i63 VoWiFi Handset, TD 93300EN.
TD 93289EN / / Ver.
42