PRELIMINARY
USER MANUAL
Ascom i63 VoWiFi Handset
Menu Operation
3 The Multifunction button may have also been
configured to act as the
button.
The support for Multifunction button is
dependent on what model of the handset
that is used. For more information, see 1.4
Functions and Accessories, page 2.
Invitation Received as a Message during an Ongoing Call
If a user receives an invitation during an ongoing call, it is displayed as an ordinary invitation, see Figure 11.
Incoming Invitation Received as a Message, page 51. The call is disconnected and the PTT call connected if
the following conditions apply:
• The handset is configured to answer invitations automatically.
• The invitation has higher priority than the call priority.
• The user does not reject to the invitation within 10 seconds.
When the invitation is received, a warning signal notifies the user before disconnecting the current call in
order to connect the PTT call.
Depending on the priority of the invitation, the ongoing call might be disconnected immediately or
after 10 seconds.
If the user rejects the invitation, it is possible to re-join the PTT later, see 8.1.7 Re-join a PTT Group, page 53.
8.1.5 Decline a PTT Invitation
Decline Invitation Received as Incoming Call
Press Decline, or
to reject a PTT invitation. The handset returns to the previously shown screen. See
also 8.1.7 Re-join a PTT Group, page 53.
Decline Invitation Received as Message
Press Reject to reject the invitation. The handset returns to the previously shown screen. See also 8.1.7 Re-
join a PTT Group, page 53 for more information.
8.1.6 Call a PTT Group
This option is only visible when PTT groups are defined. For more information, refer to the
Configuration Manual, Ascom i63 VoWiFi Handset, TD 93300EN.
1 Press Menu.
2 Select
in the menu.
3 Select PTT groups.
4 Select PTT group.
5 Press Call, or press
.
TD 93289EN / / Ver. 52
To Next Page
Loading...
Need help?
General
