PRELIMINARY
Messaging
USER MANUAL
Ascom i63 VoWiFi Handset
In Figure 8. Example of a Colored Message, page 39, there are two colored messages, a new message and
a read message, in the message inbox (left in the figure). The messages are indicated by a gradient color
bar behind the envelopes. In addition, a gradient color bar is shown below the envelop when reading a
colored message (right in the figure).
Figure 8. Example of a Colored Message
To enable colored messaging, refer to the corresponding manual for the application used. In addition,
colored labels can be mapped to message beep codes. Refer to the Installation and Operation Manual,
Portable Device Manager for Windows (WinPDM), TD 92325EN.
5.9 Decline a Call with a Predefined Message
A call may be declined with a predefined message by the called party provided that both parties are
connected via a WLAN system.
To decline a call with a predefined message when the handset rings, perform the following steps:
1 In response to the Reply with a message
template? prompt, press the Yes soft key to send a
message to the caller. A list of predefined messages is
displayed in the Templates menu.
2 Select, and if required, edit the message.
3 Click the soft key Send. The calling party number is
displayed in the handset display.
4 Click the soft key Send. A Message sent confirmation
is displayed and the message is sent to the caller.
5.10 Answering a Text Message with a Predefined Message
1 Press the soft key Reply.
2 Press the soft key More. The Templates option is
displayed.
3 Press the soft key Select. A list of predefined message
templates is displayed.
39 TD 93289EN / / Ver.
To Next Page
Loading...
Need help?
General
