PRELIMINARY
USER MANUAL
Ascom i63 VoWiFi Handset
Messaging
4 Navigate to the required message template and press
the soft key Select. If required, edit the message.
5 Press the soft key Send. The message sender’s
number is displayed in the handset display.
6 Press the soft key Send. A Message sent confirmation
is displayed and the message is sent to the caller.
5.11 Calling while Reading a Text Message
A user can make a call while reading a text message to review and discuss the message with the called
party.
The called party may be either of the following:
• The message sender, that is, the same party that sent the text message.
• A different party.
The user can activate the loudspeaker function during the call to make it easier to read the received text
message while talking to the called party.
5.11.1 Calling the Message Sender
1 Receive the text message and call the message
sender as described in 5.2.5 Call the Sender of the
Message, page 33.
2 Wait for the called party to reply. The message is
replaced by the ongoing call details.
The user may now do one of the following:
• Continue with the call without referring back to the
received message.
• Redisplay the message and continue the call to
further review and discuss the message. See
Redisplay the Message and Continue with the Call,
page 41.
• Redisplay the message and terminate the call. See
Redisplay the Message and Terminate the Call,
page 41.
5.11.2 Calling a Different Party
1 Open the text message as described in 5 Messaging,
page 32 and press the More soft key.
2 From the pop-up menu, navigate to the Call menu item
and press the Select soft key. The pre-dial screen is
displayed. Enter the number of the party to be called
TD 93289EN / / Ver. 40
To Next Page
Loading...
Need help?
General
