PRELIMINARY
USER MANUAL
Ascom i63 VoWiFi Handset
Calling
The person initiating the conference call is the conference leader, and the other are participant members of
the conference call.
4.4.13 Call Back
When a call is made to a busy handset, an automatically call back can be made when the busy handset is
free.
This option is only visible if configured in the handset. For more information, refer to the Configura-
tion Manual, Ascom i63 VoWiFi Handset, TD 93300EN.
When a busy tone sounds, do as follows:
1 Press the soft key More.
2 Select Call back.
3 Press Select.
4 Press
and wait until the handset alerts.
5 When the handset alerts, press
. The call starts
automatically.
4.4.14 Send Call Waiting
This function is used when a calling party receives a busy signal from a party engaged in a call and wishes
to notify the party that another call is waiting.
This option is only visible if configured in the handset. For more information, refer to the Configura-
tion Manual, Ascom i63 VoWiFi Handset, TD 93300EN.
When a busy tone sounds, do as follows:
1 Press the soft key More.
2 Select Call waiting.
3 Press Select. The engaged party receives a Call
waiting signal.
When the line is free it automatically calls the number again. This is system dependent.
4.4.15 Answering Call Waiting
Depending on system setup and configuration, this feature might be handled in one of two different ways.
Method 1
During an ongoing conversation and a short tone for another incoming call appears, do as follows:
1 Press the soft key More.
2 Select Answer call waiting.
TD 93289EN / / Ver.
24
To Next Page
Loading...
Need help?
General
