ASCOM NUPBC User Manual

P/N PM000223A • Rev. 1 • ISS 9 August 2017 72
Installation Manual
NU-Series Hardware
Room Modules
3. Using small needle-nose pliers, grasp the edge of the existing button label and pull it
out of the button label channel.
4. Slide your new custom button insert into the button insert channel.
5. Place the module back on the frame, and then snap the module assembly on the
backbox or spacer. See “NUBM3 Customizable Bedside Module” on page 73.

ASCOM NUPBC Specifications

General

Brand	ASCOM
Model	NUPBC
Category	Network Hardware
Language	English