Need help?Do you have a question about the ASCOM NUPBC and is the answer not in the manual?
General| Brand | ASCOM |
|---|---|
| Model | NUPBC |
| Category | Network Hardware |
| Language | English |
Describes the system's components, including control devices, IP devices, and hallway devices.
Explains how system buses transfer voice and data between components.
Discusses cable guidelines, hallway network power, and room bus cables.
Covers terminating Cat 5/5e/6/7 connectors and block connectors.
Step-by-step guide for terminating RJ-45 connectors according to T568B standard.
Explains the use of Euroblock/Phoenix connectors for room bus and relays.
Explains the hallway bus connections and cable coloring.
Defines an active room bus and its connection to dome lights.
Outlines the initial power setup from the facility's mains circuit and UPS.
Discusses UPS sizing, requirements, and compliance for powering the system.
Covers the use and requirements of the 24VDC power supply for legacy teleCARE M devices.
Provides wiring guidelines for 24V power supply wires, noting voltage drop.
Describes the Gateway II's function, installation, and wiring.
Details the installation of touch screen displays for patient communication.
Instructions for installing the wall-mounted touch screen display.
Covers the NISM2 as an interface for messaging and system setup.
Details the NUCD12IP Corridor Display as a supplementary messaging display.
Options for mounting the corridor display (ceiling, wall bracket, direct wall).
Describes the Telligence Bridge software for database configuration.
Installation sheet for the NUDL-series dome light.
Installation sheet for the NUPBC Passive Bus Concentrator.
Details the NIAT module for TV audio interface.
Installation sheet for the NUBM3 Customizable Bedside Module.
Installation sheet for the NUBM3X Bedside Extension Module.
Installation sheet for the NUCL4 Active Light Module.
Installation sheet for Cardiac and Emergency Pull Switches.
Installation sheet for the NUDM3 Customizable Button Module.
Installation sheet for the NUMI2 External Input Module.
Installation sheet for the NUPC Active Pull Cord Module.
Installation sheet for the NURD Room Display Module.
Installation sheet for the NUSPM Speech Module.
Installation sheet for the NUSB2 Sunblind Control Module.
Installation sheet for the NUBM3P Passive Bedside Module.
Installation sheet for the NIPC-W3P Passive Pull Cord Module.
Installation sheet for the NIPC2-WAP Passive Pull Cord Module.
Installation sheet for NUHS Series Handsets.
Installation sheet for the NUMDC Medical Device Cable.
To Next Page
