Troubleshooting 9
Chapter
9.
Troubleshooting
4Note: and adjustments should be made ASP
trained and authorized personnel.
Most sterilizer operating problems are accompanied
by
a system message.
messages are in the source problem. In
many cases you can take remedial actions to correct the source
of
the
problem and thereby return the sterilizer to normal operation. In
cases, the problem
is
caused by a component failure that requires
an ASP Service Call the ASP
Center at 1-888-STERRAD (1-888-783-7723).
Internationally, call your local ASP Customer Support Representative.
NX'" User's Guide
91
To Next Page
Loading...
