16
Comes complete with a test box
for products terminated in a line
cord
The standard US style receptacle box allows easy
testing of hipot and continuity on line cord terminated
products. As an additional benefit, termination boxes
are available for testing products with line cords
configured for other countries.
User selectable input voltage
Hypot III can be switched for either 115 or 230 volt
input operation through an easy access rear panel
mounted switch to allow it to be used in any country.
Low-current sense
Monitors the minimum level of current flow, thus
ensuring that the DUT is properly connected and that
the hipot test is being performed.
Electronic ramping (up & down)
Provides a gradual and timed method to increase or
decrease output voltage to the DUT, minimizing any
damage from quick high voltage changes to sensitive
DUTs.
To Next Page
Loading...
