AT&T CL84107 User Manual

99
Smart call blocker
Screen calls without numbers
Send call to answering system
Using a cordless handset or the telephone base:
1. When the telephone starts ringing, and the screen displays
Screened call, press or /SPEAKER to
pick up the call. If you have turned on the caller ID announce
feature, the telephone announces “You have a call from...”
and the caller’s name. Aer you pick up the call, the
telephone announces “To answer the call, press 1. To send
this call to the answering system, press 4. To repeat these
options, press *”.
2. Press 4 to send the caller to the answering system.
Notes:
 To turn on or off caller ID announce, see page 22 or 33.
 When the telephone is ringing, you can press OFF/CANCEL to mute the ringer temporarily.
 The caller is sent to the answering system and can leave a message even if the answering system is off.
End call
Using a cordless handset or the telephone base:
1. When the telephone starts ringing, and the screen displays
Screened call, press or /SPEAKER to
pick up the call. If you have turned on the caller ID announce
feature, the telephone announces “You have a call from...”
and the caller’s name. Aer you pick up the call, the
telephone announces “To answer the call, press 1. To send
this call to the answering system, press 4. To repeat these
options, press *”.
2. If you do not want to take the call, press on
the handset or /SPEAKER on the telephone base to end the call.
Screened call
PRIVATE CALLER
10/15
10:01
AM
HANDSET 1
1 New message
10/15
10:01
AM
ANS ON
Screened call
PRIVATE CALLER
10/15
10:01
AM
HANDSET 1
1 New message
10/15
10:01
AM
ANS ON

AT&T CL84107 Specifications

General

Brand	AT&T
Model	CL84107
Category	Cordless Telephone
Language	English