Telephone operation
45
06:30
AM
8/06
Speaker 0:01:20
Charlie Johnson
>Directory
Intercom
888-883-2445
Charlie Johnson
Options while on calls
Using the telephone base:
To access the directory while on a call:
1. Press MENU/SELECT.
2. Press CID or DIR to scroll to Directory and then
press MENU/SELECT.
3. Press CID or DIR to scroll to the desired number.
4. Press MENU/SELECT to dial the number shown.
To access the caller ID log while on a call:
1. Press MENU/SELECT.
2. Press CID or DIR to scroll to Caller ID log, then press MENU/SELECT.
3. Press CID or DIR to scroll to the desired number.
4. Press MENU/SELECT to dial the number shown.
To access the redial list while on a call:
1. Press REDIAL/PAUSE to show the most recently
dialed number.
2. Press CID or DIR to scroll to the desired number,
or press REDIAL/PAUSE repeatedly to find the desired
number. Then, press MENU/SELECT to dial the number shown.
Notes:
You cannot edit a directory entry while on a call. For more details about the directory, see the Directory section starting
on page 58.
You cannot copy a caller ID entry into the directory while on a call. For more details about the caller ID log, see page 69.
If you press REDIAL/PAUSE while on a call, you can only view the 10 most recently dialed numbers and you cannot
erase the entries. For more details about the redial memory, see page 41.
Press
OFF/CANCEL on the handset or CANCEL on the telephone base to exit redial, directory or caller ID log when
on a call.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
1. During a call, press TONE .
2. Use the dialing keys to enter the desired number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing after you end the call.
REDIAL #1/10
800-360-4121
To Next Page
Loading...
Need help?
General
