Telephone settings
28
Handset settings
QUIET mode
When QUIET mode is turned on, the telephone silences all sounds during the
set period of time (1-12 hours). However, the handset locator paging tone and
any sound-generating operations initiated by users, such as making calls using
the speakerphone or setting ringer volume, will sound as normal. Aer you
turn on QUIET mode, this feature activates immediately and the answering
system turns on automatically. When QUIET mode is on, the answering
system takes calls and records messages without broadcasting them.
To turn QUIET mode on:
1. Press and hold QUIET # in idle mode to enter the QUIET mode setting
screen. The screen shows Quiet: _ _ hours (1-12 hours).
2. Use the dialing keys to enter the desired number of hours (1-12) you would
like to turn on QUIET mode, then press MENU/SELECT. Your screen briey
shows Answering sys is ON and then Quiet mode on.
To turn QUIET mode o:
While QUIET mode is on, press and hold QUIET #. The screen then shows
Quiet mode is o and you hear a conrmation tone.
Notes:
If you change the base ringer, handset ringer, ringer volume, key tone, or caller ID announce features when QUIET mode
is on, the sample plays but the feature is still muted after saving the setting.
After QUIET mode is turned off or the set period of time has expired, all muted features will be activated again.
The PTT function is not available when QUIET mode is on.
When QUIET mode is on, the handset does not ring when there is an incoming intercom call, but the handset which
initiates the intercom call does have the calling tone as normal.
When QUIET mode is on, and Smart call blocker is on and in screening mode, all screened calls will be sent to the
answering system after screening. For more information on Smart call blocker, see page 77.
To Next Page
Loading...
Need help?
General
