AT&T CL84107 - Multiple Handset Use

Telephone operation
42
Telephone operation
To redial a number:
Using a cordless handset:
 To dial the displayed number, press PHONE/FLASH or /SPEAKER.
-OR-
 Press PHONE/FLASH or /SPEAKER, then press REDIAL/PAUSE
repeatedly to view the redial memory. Press MENU/SELECT to dial the
displayed number.
Using the telephone base:
 To dial the displayed number, li the corded handset or press /SPEAKER.
-OR-
 Li the corded handset or press /SPEAKER. Then, press REDIAL/PAUSE
repeatedly to view the redial memory. Press MENU/SELECT to dial the
displayed number.
To delete a redial entry:
Using a cordless handset or the telephone base:
 While the screen displays the desired number, press MUTE/DELETE to
delete the number from the redial memory.
Equalizer
The handset and base equalizers enable you to change the quality of the
audio to best suit your hearing.
Using a cordless handset or the telephone base:
1. While on an outside call or intercom call, press MENU/SELECT.
2. Press MENU/SELECT to select Equalizer.
3. Press CID or DIR to select Treble 1, Treble 2, Bass or Natural (the
default setting), then press MENU/SELECT to store the setting.
Notes:
 If you switch the call between the handset and the speakerphone by pressing /SPEAKER, the audio setting
remains unchanged.
 The current equalizer setting remains unchanged until a new setting is selected.