AT&T CL84107 User Manual

Directory
67
Speed dial
Delete a speed dial number
Using a cordless handset or the telephone base:
1. When the telephone is idle, press MENU/SELECT.
2. Press CID or DIR to scroll to Directory. Press
MENU/SELECT.
3. Press CID or DIR to scroll to Speed dial. Press
MENU/SELECT.
4. Press CID or DIR to scroll to the location you wish
to delete the speed dial number from, then:
 Press MUTE/DELETE on the handset or the telephone
base to delete the displayed speed dial number. There
is a conrmation tone and the screen shows Speed dial
empty before returning to the speed dial list.
-OR-
i. Press MENU/SELECT to show the directory entry.
ii. Press MENU/SELECT again.
iii. Scroll to Clear SD and then press MENU/SELECT to delete the displayed
speed dial number. There is a confirmation tone and the screen shows
Speed dial empty before returning to the speed dial list.
Make a call using speed dial
Using a cordless handset or the telephone base:
When in idle mode, press and hold the dialing key (2-9, 0) corresponding to
the assigned location you wish to call.
-OR-
1. Press MENU/SELECT when in idle mode.
2. Press CID or DIR to scroll to Directory, then press MENU/SELECT.
3. Press CID or DIR to scroll to Speed dial, then press MENU/SELECT.
4. Press CID or DIR to scroll to the desired location and then press
PHONE/FLASH or /SPEAKER on the cordless handset, or press
/SPEAKER or lift the corded handset on the telephone base.
Check your voicemail using speed dial
Using a cordless handset or the telephone base:
When in idle mode, press and hold the 1 key on a cordless handset or the
telephone base to dial your voicemail number. If you are using the telephone
base, the speakerphone is used to dial out. You may switch to corded handset
mode by picking up the corded handset.
Linda Miller
888-722-7702
2
Speed dial
empty
>2:<Unassigned>
3:< Unassigned >

AT&T CL84107 Specifications

General

Brand	AT&T
Model	CL84107
Category	Cordless Telephone
Language	English