82
Smart call blocker
Call block settings
w/o Caller name - ask the caller to press the pound key (#) before the
call rings on your telephone. You can then answer the call.
Note: Robocalls will be classied as uncategorized calls. If you select Screening, the telephone screens and
lters these calls. It asks the caller to press the pound key (#) or announces his/her name before putting
the call through to you. There may be robocalls that you do not want to miss. For example, robocalls with
announcements or notices from schools or pharmacies. You can set up your star name list with these caller
names to allow their calls to get through to you. See Star name list on page 88.
Block list
Add numbers that you want to prevent their calls from ringing through.
The block list stores up to 1,000 entries.
Add a block entry:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when the telephone is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the telephone is not in
use. Press CID or DIR to scroll to Smart call blk, then press
MENU/SELECT.
2. Press CID or DIR to scroll to Block list, and then press MENU/SELECT.
3. Press CID or DIR to scroll to Add new entry, then press MENU/SELECT.
4. When the screen displays ENTER NUMBER, use the dialing keys to enter a
number (up to 30 digits).
Press CID or DIR to move the cursor to the le or right.
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p
appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press
CID, DIR or REDIAL/PAUSE repeatedly to nd the desired number. Press
MENU/SELECT to copy the number.
5. Press MENU/SELECT to move on to the name.
The screen shows Number already saved if the number is already in the
block list. You cannot save the same number twice.
6. When the screen displays ENTER NAME, use the dialing
keys to enter a name (up to 15 characters). Press a key
repeatedly until the desired character appears. The rst
character of every word is capitalized.
Press CID or DIR to move the cursor to the le or right.
Press 0 to add a space.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press TONE to change the next letter to upper or lower case.
7. Press MENU/SELECT to store your block entry.
ENTER NAME
Salesman_
To Next Page
Loading...
Need help?
General
