AT&T CL84107 User Manual

Multiple handset use
57
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
 During a one-to-one PTT call, press PHONE/FLASH on your handset or
/SPEAKER on the telephone base. The PTT call ends automatically and
the outside call is answered.
 During a one-to-group PTT call, press PHONE/FLASH on the initiating
handset or /SPEAKER on the initiating telephone base. The PTT call
ends automatically and the outside call is answered.
 During a one-to-group PTT call, press PHONE/FLASH on any one of the
destination handsets, or press /SPEAKER on the destination telephone
base. That device answers the outside call. The PTT call continues for the
rest of the PTT participants.
 To leave the PTT call without answering the incoming call, press
OFF/CANCEL on your handset or CANCEL on your telephone base.
The telephone continues to ring.
Make an outgoing call during a PTT call
 During a one-to-one PTT call, press PHONE/FLASH on your handset or
/SPEAKER on your telephone base to get a dial tone. The PTT call ends
automatically.
 During a one-to-group PTT call, press PHONE/FLASH on the initiating
handset or /SPEAKER on the initiating telephone base. The PTT call
ends automatically and you get a dial tone.
 During a one-to-group PTT call, press PHONE/FLASH on any one of the
destination handsets or press /SPEAKER on the destination telephone
base. That device gets a dial tone. The PTT call continues for the rest of the
PTT participants.
End or leave a PTT call
The initiating device can end the PTT call. If any one of the destination devices
leaves the PTT call, the call continues until all participants or the initiator hangs up.
Press OFF/CANCEL on the handset or place the handset in the charger, or
press CANCEL on the telephone base. The screen shows Push to talk Ended.
Note: After PUSH TO TALK on the handset or FLASH/PTT on the telephone base is released, the PTT call
remains open for a short time. If no one presses PUSH TO TALK on the handset or FLASH/PTT on the
telephone base within 10 seconds, the PTT call ends automatically.
Push-to-talk (PTT)
3. Press PHONE/FLASH or any dialing key (0-9,
#
or TONE ) on the destination
handset, or press /SPEAKER or any dialing key (0-9,
#
or TONE ) on the
telephone base or lift the corded handset to answer. Both devices show Intercom.
4. To end the intercom call, press
OFF/CANCEL on your handset or place
the handset in the charger, or press CANCEL on the telephone base. Both
screens show Intercom ended.

AT&T CL84107 Specifications

General

Brand	AT&T
Model	CL84107
Category	Cordless Telephone
Language	English