Getting started
16
Installation options
Wall-mount to tabletop installation
To change the telephone base from the wall-mount position to tabletop
position:
1. Remove the telephone base from the wall.
2. If necessary, untie the bundled telephone cord and power adapter cord.
Make sure that you unplug the power adapter and telephone line cord
from the wall outlets before you begin.
3. Push, as indicated by arrows in the illustration, until the bracket is released,
and then rotate it upward until it clicks into the tabletop position.
Tabletop
Wall-mount
Side view
Rear view
To Next Page
Loading...
Need help?
General
