Getting started
15
Installation options
3. Make sure the telephone line cord and the power adapter are plugged into
their jacks on the telephone base, and are routed through the channels. If
necessary, bundle the telephone cord and power adapter cord, and secure
them with twist ties. Plug the power adapter and telephone line into the
wall outlets.
4. Align the mounting studs on the mounting plate with the mounting holes
on the bracket and press the telephone base down until it clicks securely
into place.
2. Slide the handset tab upward. Rotate the handset tab by 180 degrees. The
protruding edge of the handset tab holds the corded handset in place
when the telephone is mounted on the wall.
Handset tab
Switch hook
To Next Page
Loading...
