AT&T CL84107 - Allow List

85
Smart call blocker
Call block settings
Delete all block entries:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when the telephone is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the telephone is not in
use. Press CID or DIR to scroll to Smart call blk, then press
MENU/SELECT.
2. Press CID or DIR to scroll to Block list, and then press MENU/SELECT.
3. Press CID or DIR to highlight Delete all, then press MENU/SELECT. The
screen shows Delete all in block list?.
4. Press MENU/SELECT again to confirm. The screen displays Deleted. There is
a confirmation tone.
Allow list
Add numbers that you want to allow their calls to get through to you. The
allow list stores up to 200 entries.
Add an allow entry:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when the telephone is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the telephone is not in
use. Press CID or DIR to scroll to Smart call blk, then press
MENU/SELECT.
2. Press CID or DIR to scroll to Allow list, and then press MENU/SELECT.
3. Press CID or DIR to scroll to Add new entry, then press MENU/SELECT.
4. When the screen displays ENTER NUMBER, use the dialing keys to enter a
number (up to 30 digits).
 Press CID or DIR to move the cursor to the le or right.
 Press MUTE/DELETE to erase a digit.
 Press and hold MUTE/DELETE to erase all digits.
 Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p
appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press
CID, DIR or REDIAL/PAUSE repeatedly to nd the desired number. Press
MENU/SELECT to copy the number.
5. Press MENU/SELECT to move on to the name.
 The display shows Number already saved if the number is already in
the allow list. You cannot save the same number twice.