Telephone settings
38
Telephone base settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse
dialing before using the telephone.
To set the dial mode:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press CID or DIR to scroll to Settings, then press
MENU/SELECT.
3. Press CID or DIR to scroll to Dial mode, then press MENU/SELECT.
4. Press CID or DIR to select Touch-tone or Pulse, then press
MENU/SELECT. The screen shows DIAL MODE is touch-tone or DIAL MODE
is pulse. There is a confirmation tone and the screen returns to the previous
menu.
Web address
Use this feature to view the AT&T website address.
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Press CID or DIR to scroll to Web address, then
press MENU/SELECT.
www.telephones.
att.com
Settings
>Web address
Home area code
>Dial mode
DIAL MODE
>Touch-tone
To Next Page
Loading...
Need help?
General
