AT&T CL84107 - Use Caller ID to Automatically Set Date and Time; Home Area Code

Telephone settings
26
Handset settings
Use caller ID to automatically set date and time
If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. Follow the steps below to turn the
CID time sync feature on or o. The default setting is On.
1. When the handset is in idle mode, press MENU/SELECT to
enter the main menu.
2. Press CID or DIR to scroll to Settings, then press
MENU/SELECT.
3. Press CID or DIR to scroll to CID time sync, then
press MENU/SELECT.
4. Press CID or DIR to highlight On or Off, then press
MENU/SELECT to save. There is a confirmation tone and the
screen returns to the previous menu.
Home area code
If you dial seven digits to make a local call (no area code required), enter your
area code into the telephone as the home area code. When you receive a call
from within your home area code, the caller ID log only displays the seven
digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If
you dial 10 digits to make a local phone call, do not use this home area code
feature. If you do, you cannot place local calls from your caller ID log, as they
will have only seven digits.
To set the home area code:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press CID or DIR to scroll to Settings, then press
MENU/SELECT.
3. Press CID or DIR to scroll to Home area code,
then press MENU/SELECT. The screen briey shows
Only for 7digit dial from CID.
4. Use the dialing keys to enter a three-digit home area code.
 Press MUTE/DELETE to delete a digit.
 Press and hold MUTE/DELETE to delete all digits.
5. Press MENU/SELECT to save. There is a conrmation tone and the screen
shows Area code will not show in CID briey before returning to the
previous menu.
Note: If in the future, your telephone service provider requires you to dial 10 digits to make a local call (area
code plus telephone number), you need to delete your home area code and dial out locally from the call ID
log. With the home area code displayed, press and hold MUTE/DELETE until the digits are deleted, and
then press MENU/SELECT. The home area code is restored to its default setting of _ _ _ (empty).
Key tone
>CID time sync
CID TIME SYNC
>On
CID time sync
>Home area code
HOME AREA CODE
___