91
Smart call blocker
Call block settings
Screening announcements
If you have set to screen calls without numbers and/or screen
uncategorized calls, the callers of one or all of the following incoming call
categories will hear a screening announcement.
Calls that are “out of area“ or with numbers set to “Private“.
Calls with numbers that are not in your directory, allow list, or block list, or
with absent caller ID number.
Calls with caller ID names that are not in your star name list.
The telephone has two screening options, and each option has its default
screening announcements.
Screening with caller name - “Hello. Calls to this number are being screened by
Smart call blocker. Please say your name aer the tone, then press pound.”
-OR-
Screening without caller name - “Hello. Calls to this number are being screened
by Smart call blocker. If you’re a family member, friend or invited caller, please
press pound to be connected. If you’re a solicitor, please hang up now.”
You can use these announcements, or record your own name to replace “this
number” in both announcements.
Please refer to Record your name for all screening announcements on page
92.
Play your current announcement of screening with caller
name:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when the telephone is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the
telephone is not in use. Press CID or DIR to scroll to
Smart call blk, then press MENU/SELECT.
2. Press CID or DIR to scroll to Screening annc, then press
MENU/SELECT.
3. Press CID or DIR to scroll to Play annc, then press
MENU/SELECT.
4. Press MENU/SELECT again to select w/ Caller name.
PLAY ANNC
>w/ Caller name
Rec your name
>Play annc
Uncategorized
>Screening annc
To Next Page
Loading...
Need help?
General
