Caller ID
74
Caller ID operation
Save a caller ID log entry to the allow list
Using a cordless handset or the telephone base:
1. When in the caller ID log, press CID or DIR to browse.
2. When the desired entry displays, press MENU/SELECT.
3. Press CID or DIR to choose Allow list, then press MENU/SELECT.
4. When the screen displays EDIT NUMBER, use the dialing keys to edit the
number.
Press CID or DIR to move the cursor to the left or right.
Press MUTE/DELETE to backspace and erase a digit.
Press and hold MUTE/DELETE to erase the entire entry.
Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a
p appears).
5. Press MENU/SELECT to move to the name.
6. When the screen displays EDIT NAME, use the dialing keys (page 60) to
edit the name.
Press CID or DIR to move the cursor to the left or right.
Press 0 to add a space.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press # (pound
key).
Press TONE to change the next letter to upper or lower case.
7. Press MENU/SELECT when done. The screen shows Saved to allow list.
Save a caller ID log entry to the block list
Using a cordless handset or the telephone base:
1. When in the caller ID log, press CID or DIR to browse.
2. When the desired entry displays, press MENU/SELECT.
3. Press CID or DIR to choose Block list, then press MENU/SELECT.
4. When the screen displays EDIT NUMBER, use the dialing keys to edit the
number.
Press CID or DIR to move the cursor to the left or right.
Press MUTE/DELETE to backspace and erase a digit.
Press and hold MUTE/DELETE to erase the entire entry.
Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a
p appears).
5. Press MENU/SELECT to move to the name.
6. When the screen displays EDIT NAME, use the dialing keys (page 60) to
edit the name.
Press CID or DIR to move the cursor to the left or right.
Press 0 to add a space.