AT&T CL84107 - Control Uncategorized Calls

81
Smart call blocker
Call block settings
4. If you select Screening, press CID or DIR to choose one of the following
options, then press MENU/SELECT.
 w/ Caller name - ask the caller to say his/her name
before the call rings on your telephone. You will hear
the caller’s name announced if you have turned on
the caller ID announce feature. Then, you can decide
whether to answer or reject the call, or to forward the
call to the answering system.
 w/o Caller name - ask the caller to press the pound key (#) before the
call rings on your telephone. You can then answer the call.
Control uncategorized calls
Use this setting to control calls with numbers that are not in your directory, allow
list or block list, or have no caller ID number display. You can choose to allow or
reject these calls directly. You can also choose to screen them with or without
learning the callers’ names before you decide whether to answer or reject these
calls. Moreover, you can forward these calls to the answering system.
To change the setting:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when the telephone is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the
telephone is not in use. Press CID or DIR to scroll to
Smart call blk, then press MENU/SELECT.
2. Press CID or DIR to scroll to Uncategorized, then press
MENU/SELECT.
3. Press CID or DIR to choose one of the following options,
then press MENU/SELECT.
 Screening - ask the caller to press the pound key (#)
or to say his/her name before the call rings on your
telephone.
 Allow - allow the calls to get through and ring.
 Answering sys - send the calls to the answering system
without ringing.
 Block - reject the calls with block announcement.
4. If you select Screening, press CID or DIR to choose one of the following
options, then press MENU/SELECT.
 w/ Caller name - ask the caller to say his/her name
before the call rings on your telephone. You will hear
the caller’s name announced if you have turned on
the caller ID announce feature. Then, you can decide
whether to answer or reject the call, or to forward the
call to the answering system.
SCREENING
>w/ Caller name

Calls w/o num
>Uncategorized

Answering sys
>Smart call blk
UNCATEGORIZED
>Screening
SCREENING
>w/ Caller name