AT&T CL84107 - Quick Reference Guide - Telephone Base

Getting started
4
Quick reference guide - telephone base
FLASH/PTT
 Press to initiate a one-to-one (page
54) or one-to-group broadcast (page
55).
 Press and hold to broadcast to a group of
system devices (page 55).
 During a call, press to answer an
incoming call when you receive
a call waiting alert (page 43).
CANCEL
 While in a menu, press to cancel an
operation, back up to the previous
menu, or exit the menu display; or
press and hold to exit to idle mode.
 When the telephone base is ringing,
press to mute the ringer temporarily
(page 40).
 Press and hold while the telephone
is not in use to erase the missed call
indicator.
DIR
 Press DIR to show directory entries
when the telephone is not in use (page
61).
 Press to scroll up while in menus and lists.
 While entering names or numbers,
press to move the cursor to the right.
CID
 Press CID to show caller ID
log when the telephone is not in use
(page 71).
 Press to scroll down while in menus and
lists.
 While entering names or numbers,
press to move the cursor to the le.
MENU/SELECT
 When the telephone is not in use, press
to show the menu.
 While in the menu, press to select an
item or save an entry or setting.
/FIND HS
 While the telephone is idle, press to
page all handsets (page 48).
 VOL/VOL
 During message playback or call
screening, press to adjust the listening
volume (page 119).
 While in idle mode, press to adjust the
base ringer volume.
 When on a call, press to adjust the
listening volume.
IN USE indicator
 On when the telephone is in use, or when
the answering system is answering an
incoming call.
 On when a handset is being registered.
 Flashes when there is an incoming
call or when all handsets are being
deregistered.
 Flashes when another telephone is in use
on the same line.