92
Smart call blocker
Call block settings
Play your current announcement of screening without caller name:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when the telephone is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the
telephone is not in use. Press CID or DIR to scroll to
Smart call blk, then press MENU/SELECT.
2. Press CID or DIR to scroll to Screening annc, then press
MENU/SELECT.
3. Press CID or DIR to scroll to Play annc, then press
MENU/SELECT.
4. Press CID or DIR to scroll to w/o Caller name, then
press MENU/SELECT.
Record your name for all screening announcements:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when the telephone is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the telephone is not in
use. Press CID or DIR to scroll to Smart call blk, then press
MENU/SELECT.
2. Press CID or DIR to scroll to Screening annc, then press MENU/SELECT.
3. Press MENU/SELECT to select Rec your name. The system announces,
“Record after the tone. Press 5 when you are done.”
4. Speak towards the handset to record your name. Press 5 to end recording.
To listen to the announcement with your recorded name again, scroll to
Play annc and press MENU/SELECT.
Uncategorized
>Screening annc
PLAY ANNC
>w/o Caller name
Rec your name
>Play annc
To Next Page
Loading...
Need help?
General
