93
Smart call blocker
Call block settings
Reset all your screening announcements:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when the telephone is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the telephone is not in
use. Press CID or DIR to scroll to Smart call blk, then press
MENU/SELECT.
2. Press CID or DIR to scroll to Screening annc, then press
MENU/SELECT.
3. Press CID or DIR to scroll to Reset annc, then press
MENU/SELECT. The screen shows Reset to default annc?.
Press MENU/SELECT again to conrm. The screen shows
Annc. reset to default before returning to the previous
menu.
-OR-
1. Press CALL BLOCK when the telephone is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the telephone is not in
use. Press CID or DIR to scroll to Smart call blk, then press
MENU/SELECT.
2. Press CID or DIR to scroll to Screening annc, then press MENU/SELECT.
3. Press CID or DIR to scroll to Play annc, then press MENU/SELECT.
4. Press CID or DIR to scroll to w/ Caller name or w/o Caller name, then
press MENU/SELECT.
While the announcement is playing, press MUTE/DELETE on the handset
or the base to delete the announcement. The system announces,
“Announcement deleted” and the screen shows Annc. deleted.
Your name will be deleted from all the screening announcements, and the
telephone will use the default screening announcements described on page
91.
Uncategorized
>Screening annc
Play annc
>Reset annc
To Next Page
Loading...
Need help?
General
