89
Smart call blocker
Call block settings
4. When the screen displays ENTER NAME, use the dialing
keys to enter a name (up to 15 characters). Press a key
repeatedly until the desired character appears. The rst
character of every word is capitalized.
Press CID or DIR to move the cursor to the le or right.
Press 0 to add a space.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press TONE to change the next letter to upper or lower case.
5. Press MENU/SELECT to store your star name entry. The display shows
Name already saved if the name is already in the star name list. You
cannot save the same name twice.
Review star name list:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when the telephone is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the
telehpone is not in use. Press CID or DIR to scroll to
Smart call blk, then press MENU/SELECT.
2. Press CID or DIR to scroll to Star name list, and then
press MENU/SELECT.
3. Press MENU/SELECT to choose Review.
4. Press CID or DIR to browse through the star name
entries.
Note: Star name list is empty appears if there are no star name entries.
Save a caller ID log entry to star name list:
Using a cordless handset or the telephone base:
1. Search for the desired caller ID log entry (see Review the caller ID log on
page 71).
2. When the desired entry displays, press MENU/SELECT.
3. Press CID or DIR to scroll to Star name list, then press
MENU/SELECT.
4. The screen displays Star this name?, and the caller ID
name of the caller.
5. Press MENU/SELECT, and the screen shows Saved to star name list.
ENTER NAME
Bayriver Eleme_
>Review
Add new entry
Bayriver Elemen
Star this name?
Bayriver Elemen
To Next Page
Loading...
