AT&T DLC-100 - Page 71

Testing Your System
Digital Life User Manual | Page 61 of 62 ATT-UM-V1.1-201303
Device Procedure Results Notes
Panel PIN to cancel
the alarms and then
enter your Alarm
Panel PIN again to
clear the messages
Outlying Siren Testing
• Test each outlying siren
one at a time by
executing the following
procedure:
o Press the FIRE
button on any
keypad
o When prompted,
press the asterisk (*)
key to confirm the
Fire Emergency
o After alarms have
been observed,
enter your Alarm
Panel PIN to cancel
the alarms and then
enter your Alarm
Panel PIN again to
clear the messages