AT&T MERLIN Plus Training Manual

To change the line ringing (OFF/ON/DELAYED):
Action
Result
Slide the T/P switch to P.
You’ll hear the ringing pattern. the
red line light(s) come on and the
green line light(s) flash.
Touch the button of the phone line
The red light may come on, flash,
you want to change.
or be off.
1.
2.
3.
4.
5.
Enter the following codes until the
desired affect appears:
*35–No ring
No ring–light off
*36–Delayed ring
Delayed ring–light on
*37–Ring
Ring–light flashing
Repeat steps 2 and 3 for each line
you want to change.
Slide the T/P switch to the center
The line lights go off.
position.
Note: If you often change the ringing pattern for your phone, you may want to
program an Override button. For example, if you cover for a co-worker every day at
lunch time, you can set up your phone for delayed or no ring. Whenever you want
the phone to ring, you can touch the
Override button and the phone will ring until
you touch Override again. (See page 55 for the procedures to program and use
Ring Override.)
NOW YOU TRY IT!
Ringing Changes
1. If you are the back-up person for an Attendant, change the ringing on all
lines from Off to Delayed while the Attendant is on a coffee break or at
lunch. (Pay attention to the lights next to the line buttons while you do this.)
2. Remember to change the ringing to Off after the Attendant returns.
9

AT&T MERLIN Plus Specifications

General

Brand	AT&T
Model	MERLIN Plus
Category	Conference System
Language	English