To
program
an
auto answer-Intercom
button:
Action
Result
1. Label a lighted button
“Auto Answer-lnt”.
Auto Answer-
Int
2. Slide the T/P switch to P. You’ll hear a ringing pattern. The
red line light(s) come on and the
green line light(s) flash.
3. Touch the button you Iabelled.
4. Touch * and then 70.
The button is programmed.
5. Slide the T/P switch to the center
position.
To
use
the
auto answer
feature:
Touch the
Auto Answer-lnt
The green light next to Auto
button.
Answer-lnt comes on.
To
cancel auto answer:
Touch the
Auto Answer-lnt
The green light next to Auto
button.
Answer goes off.
Note:
You can program both an
Auto Answer-Intercom
button and an
Auto
Answer-All
button, but you can use only one at a time.
66
To Next Page
Loading...
