ATEN VK430 - Getting Started

ATEN Room Booking System User Manual
4
Getting Started
Complete the following tasks to start setting up your ATEN Room Booking
System and managing your room resources.
No. Getting Started Tasks Detailed Procedure
1 Install an ATEN RBS Panel, using the
preinstalled wall mount (and 3M mount
tape), for each of the room to be manged
by your ATEN Room Booking System.
Installation, page 12
2 Install a configuration tool, ATEN RBS
Configurator to a computer that has
network access to the installed RBS
panel(s).
Installing RBS
Configurator, page 17
3 Define a desired layout and theme style to
for the installed ATEN RBS Panels.
Chapter 4, Panel Profile
4 By default, the RBS panel is DHCP-
enabled. Configure the network settings if
needed.
Configuring Network
Settings, page 94
5 Set up the calender server for ATEN Room
Booking System.
Chapter 5, Calendar
Server
6 Upload the configured profiles and settings
to the ATEN RBS Panels.
Uploading Profiles and
Setting Changes to ATEN
RBS Panels, page 77